Filter
Top Products
4.2 System Programming
Time (Day/Night/Lunch) Service Changing Mode
006
System Programming 4-17
Description This program is used to determine if the day/night/lunch mode is
set automatically or manually.
Selection Man (manual) / Auto (automatic)
Default Manual
Programming 1. Enter 006.
Display: Day/Night Mode
2. Press NEXT.
Display example: Mode Change:Man
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • If automatic is assigned, the day/night/lunch mode is changed at the
time programmed in [007] “Time (Day/Night/Lunch) Service Start
Time”. However, if feature number “783#” is entered and the mode is
changed to “lunch”, the mode will not be changed at the programmed
time until feature number “780#” is entered.
• The operator and manager can change the day/night/lunch mode at any
time.
Feature Reference Section 3, Features
Time (Day/Night/Lunch) Service