Filter
Top Products
System Programming 4-115
4.2 System Programming
Door Opener Assignment — Day/Night/Lunch
703–705
Description These programs assign which extensions can open a door in the
day, night and lunch modes.
Selection • Door opener number: 1 – 4, ( = all door openers)
• Jack number: 01 – 24, ( = all jacks)
• Enable / Disable
Default All door openers – all jacks – Enable
Programming 1. Enter a program address (703 for day, 704 for night or
705 for lunch).
Display example: Day Door-Open
2. Press NEXT.
Display: Door NO? →
3. Enter a door opener number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:#01:Enable
4. Keep pressing until the desired jack number is displayed
or enter a jack number after pressing the # key.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack number, press or , or # and
the desired jack number.
8. Repeat steps 5 through 7.
9. To program another door opener, press NEXT or PREV, or
SELECT and enter the desired door opener number.
10. Repeat steps 4 through 9.
11. Press END.
Conditions • To assign all door openers and all jacks to the same selection, press the
key in steps 3 and 4.
In this case, the display will show: DP- :# :Mixed.
• Four door openers can be installed per system.
Feature References Section 3, Features
Door Opener
Time (Day/Night/Lunch) Service