Filter
Top Products
4-84 System Programming
4.2 System Programming
OGM Mode Selection
502
Description Selects how the two outgoing messages (OGM) are used. There are
two modes as follows.
MODE 1: both OGM1 and OGM2 are used for DISA1 so that the
system can receive two incoming calls via DISA at the
same time.
MODE 2: OGM1 is used for DISA1 and OGM2 is used for
DISA2.
Selection MODE 1 / MODE 2
Default MODE 1
Programming 1. Enter 502.
Display: OGM Selection
2. Press NEXT.
Display example: MODE 1
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • Program [414]–[416] “Outside (CO) Line Mode — Day/Night/Lunch”
are used to assign DISA1 or DISA2 to each outside (CO) line according
to this assignment.
• If an optional OGM/FAX Detection card is not installed, this assignment
should be “MODE 1”.
Feature References Section 3, Features
Direct Inward System Access (DISA)
Data Line Security
Outgoing Message (OGM)