Filter
Top Products
4-116 System Programming
4.2 System Programming
Doorphone Ringing/Tone Pattern Selection
706
Selection • Doorphone number: 1 – 4, ( = all doorphones)
• Single / Double / Triple / S-Double
Default All doorphones — Triple
Programming 1. Enter 706.
Display: Door Ring Tone
2. Press NEXT.
Display: Door NO? →
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:Triple
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all doorphones to the same selection, press the key in
step 3. In this case, the display will show: DP- :Mixed.
• PT users will hear the assigned pattern tone instead of ringing.
• The programs [115] “Extension Ringing Pattern Selection” and [423]
“Outside (CO) Line Ringing Pattern Selection” should be considered
when assigning this program.
Feature Reference Section 3, Features
Doorphone Call
Description Assigns an incoming doorphone call ringing pattern for each
doorphone. There are four types of patterns as follows.
1 s
Single:
Double:
Triple:
S-Double: