Filter
Top Products
4.2 System Programming
Outside (CO) Line Ringing Pattern Selection
423
System Programming 4-81
Selection • Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Single / Double / Triple
Default Single
Programming 1. Enter 423.
Display: CO Ring Pattern
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Single
4. Keep pressing SELECT until the desired time is displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
• The programs [115] “Extension Ringing Pattern Selection” and
[706] “Doorphone Ringing/Tone Pattern Selection” should be
considered when assigning this program.
Feature Reference Section 3, Features
Ringing Pattern Selection for Intercom Calls and Outside (CO) Lines
Description Assigns an incoming outside call ringing pattern for each outside
(CO) line. There are three types of patterns as follows.
1 s
Single:
Double:
Triple: