Filter
Top Products
4-104 System Programming
4.2 System Programming
Account Code Entry Mode
605
Description Selects the account code input mode for each extension jack. There
are four account code modes: Option, Forced, Verify-All and
Verify-Toll.
Option mode: The user can enter any account code, if
needed.
Forced mode: The user must always enter an account code.
The code can be any number.
Verify – All mode: The user must always enter a pre-assigned
account code to make an outside call.
Verify – Toll mode: The user can enter an assigned account code
to override toll restriction. The toll restriction
COS numbers 3 through 5 will be changed
temporarily to the COS number 2. (The COS
numbers 1 and 2 will not be changed.)
Selection • Jack number: 01 – 24, ( = all jacks)
• Option / Forced / Verify – All / Verify – Toll
Default All jacks – Option
Programming 1. Enter 605.
Display: Call Accounting
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display: #01:Option
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.