Filter
Top Products
4-26 System Programming
4.2 System Programming
DTMF Integration for KX-TVS75/KX-TVS100
103
Description Enables or disables the system to send codes (DTMF tones) to
indicate the status of a call (busy, answered, ringing, disconnected,
etc.) in addition to the normal call progress tones. These codes
enable the Panasonic Voice Processing System
(KX-TVS75/KX-TVS100) to immediately recognize the current
status of the call and speed up the call handling.
Selection Enable / Disable
Default Disable
Programming 1. Enter 103.
Display example: DTMF Integration
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • The table on the next page describes the codes (DTMF tones), call state
and conditions for the DTMF integration operation.
• Extensions which are not assigned as the voice mail ports will not receive
the DTMF tones.
• In order to select “Enable” in this program, programs [130] “Voice Mail 1
APT Port for KX-TVS50” and [131] “Voice Mail 2 APT Port for
KX-TVS50” should first be set to “Disable”.
• This feature improves the performance of the Panasonic KX-TVS75/
KX-TVS100 which have been programmed for Inband Signaling. Please
refer to the Voice Processing System manual for details on programming
Inband Signaling.
Feature Reference Section 3, Features
Voice Mail Integration for KX-TVS75/KX-TVS100