Filter
Top Products
4-112 System Programming
4.2 System Programming
Room Monitor Assignment
612
Description Assigns which extensions can be monitored by another telephone.
Selection • Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
Default All jacks – Disable
Programming 1. Enter 612.
Display: Room Monitor
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
• The jacks which are assigned to “DISABLE” cannot accept feature
number “7351#” for the room monitor feature.
Feature Reference Section 3, Features
Room Monitor