Filter
Top Products
4-114 System Programming
4.2 System Programming
Doorphone Ringing Assignment — Day/Night/Lunch
700–702
Description These programs assign which extensions will ring when a
doorphone call is received in the day, night and lunch modes.
Selection • Doorphone number: 1 – 4, ( = all doorphones)
• Jack number: 01 – 24, ( = all jacks)
• Enable / Disable
Default All doorphones – all jacks – Enable — Day/Night/Lunch
Programming 1. Enter a program address (700 for day, 701 for night or 702
for lunch).
Display example: Day Door Phone
2. Press NEXT.
Display: Door NO? →
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:#01:Enable
4. Keep pressing until the desired jack number is displayed
or enter a jack number after pressing the # key.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press or , or # and the
desired jack number.
8. Repeat steps 5 through 7.
9. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
10. Repeat steps 4 through 9.
11. Press END.
Conditions • To assign all doorphones and all jacks to the same selection, press the
key in steps 3 and 4.
In this case, the display will show: DP- :# :Mixed.
• Four doorphones can be installed to the system.
Feature References Section 3, Features
Doorphone Call
Time (Day/Night/Lunch) Service