Filter
Top Products
4-76 System Programming
4.2 System Programming
Automatic Designated Outside (CO) Line Access
419
Description Assigns the sequence in which outside (CO) lines will be accessed
during the Automatic Line Access mode. When a user dials the
feature number for automatic line access (9), an idle line is
searched for in the programmed outside (CO) lines.
Selection • Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Enable / Disable
Default All outside (CO) lines — Enable
Programming 1. Enter 419.
Display: Auto Line Access
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 and 6.
8. Press END.
Condition • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
Feature References Section 3, Features
Line Access, Automatic
Line Preference – Outgoing