Filter
Top Products
4.2 System Programming
Outside (CO) Line Connection Assignment
400
System Programming 4-61
Description Used to identify which outside (CO) lines are connected to the
system. This prevents users from calling a line which is not
connected.
Selection • Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Connect / Not Connect
Default All outside (CO) lines – Connect
Programming 1. Enter 400.
Display: CO Connection
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Connect
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
Feature Reference Section 3, Features
Outside (CO) Line Connection Assignment