4.2 System Programming
One-Touch Transfer Using a DSS Button
4-16 System Programming
005
Description Enables or disables automatically holding an outside call when a
DSS button on a DSS Console or proprietary telephone is pressed.
Through this assignment, the button can perform the following.
• With Transfer — Pressing a DSS button holds an outside call and
quickly transfers it to an extension without
pressing the TRANSFER button.
• Without Transfer — Pressing the TRANSFER button and then a
DSS button will transfer an outside call.
Selection With Transfer / Without Transfer
Default With Transfer
Programming 1. Enter 005.
Display: DSS Mode
2. Press NEXT.
Display example: With Transfer
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • This assignment applies to all DSS buttons on all DSS Consoles and
proprietary telephones in the system.
Feature Reference Section 3, Features
One-Touch Transfer Using a DSS Button