Filter
Top Products
4.2 System Programming
DTMF Receiver Check
107
System Programming 4-31
Description Enables or disables the DTMF receiver to check whether the DTMF
receivers are activated normally or not.
Six DTMF receivers work with the following cards.
DTMF-R 1 and 2 — basic extension card (jacks 01 – 08)
DTMF-R 3 and 4 — extension expansion card 1
(jacks 09 – 16)
DTMF-R 5 and 6 — extension expansion card 2 (jacks 17 – 24)
Selection • DTMF Receiver number: 1 – 6
• Enable / Disable
Default All DTMF receivers — Enable
Programming 1. Enter 107.
Display: DTMF-R Selection
2. Press NEXT.
Display:DTMF-R NO? →
3. Enter the DTMF receiver number.
Pressing NEXT also can enter DTMF receiver number 1.
Display example:DTMF-R1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another DTMF receiver, press NEXT or PREV,
or SELECT and enter the desired DTMF receiver number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions None
Feature References None