Filter
Top Products
4-98 System Programming
4.2 System Programming
DISA Incoming Assignment
516
Description Assigns the extensions which can receive calls via DISA.
Selection • Jack number: 01 – 24, ( =all jacks)
• Enable / Disable
Default All jacks — Enable
Programming 1. Enter 516.
Display: DISA Assign
2. Press NEXT.
Display example: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • If a caller attempts to access an assigned extension, the caller will hear a
reorder tone and the call will be disconnected.
• If a call via DISA is received by a ring group, this program will not
work for extensions in that ring group. In this case, disabled extensions
will still ring.
• To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Direct Inward System Access (DISA)