Filter
Top Products
4.2 System Programming
DISA Built-in Auto Attendant
501
System Programming 4-83
Description Assigns the DISA built-in auto attendant number. The extension
number can be assigned as a one digit number and used as a DISA
built-in auto attendant number.
Selection • DISA built-in auto attendant (AA) number: 0 – 9
• Jack number: 01 – 24 / Ring Group number: 1 – 8
Default All numbers — Not stored
Programming 1. Enter 501.
Display: DISA Built-In
2. Press NEXT.
Display example: AA NO? →
3. Enter a DISA built-in auto attendant number.
Pressing NEXT also can enter DISA AA number 0.
Display example: 0: Not Stored
4. Press SELECT until the desired selection is displayed and
enter an extension or ring group number.
To change the current entry, press CLEAR and enter the new
number.
Display example: 0: Jack-01
5. Press STORE.
6. To program another DISA AA number, press NEXT or
PREV, or SELECT and enter the desired DISA AA
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To enable this feature, the user must select “With AA” in program
[500] “DISA Incoming Dialing Mode Selection”.
• This system can store up to ten programmable DISA built-in auto
attendant numbers.
• If the user would like to use a line access number “9” and/or operator
number “0” in the “With AA” mode, do not assign auto attendant
number(s) which correspond to the line access number and/or operator
number (0 and/or 9).
Feature Reference Section 3, Features
Direct Inward System Access (DISA)