Filter
Top Products
4.2 System Programming
System Data Dump
804
System Programming 4-125
Description Starts or stops printing the assigned data. All or a specific area of
current programmed data is printed out. The areas are as follows.
All Para: All data
System Para: All data except the following programs.
CO Para: Programmed data of [400]–[403], [405]–[423] and
[900].
Ext Para: Programmed data of [102], [516], [600]–[620], and
[904] and [905] if a proprietary telephone is
connected. The assigned data on the PF
(Programmable Feature) buttons and CO buttons are
also printed out.
Programmed data of [102], [516] and [600]–[612] if
a single line telephone is connected. The stored
Personal Speed Dialing numbers are also printed
out.
DSS Para: Data assigned to DSS buttons and PF buttons on the
DSS Consoles.
Speed Dial: Programmed data of [001]
Stop Output: Stops printing.
Selection All Para / System Para / CO Para + outside (CO) line number:
1 – 6, ( = all outside (CO) lines) /
Ext Para + jack number: 01 – 24, ( = all jacks) /
DSS Para + DSS Console number: 1 or 2, ( = all DSS
Consoles) / Speed Dial / Stop Output
Default Not applicable.
Programming 1. Enter 804.
Display: System Data Dump
2. Press NEXT.
Display: Menu:All Para
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. If CO Para, Ext Para or DSS Para is selected, enter an
outside (CO) line, jack or DSS Console number.
6. Press STORE.
7. Press END.