Filter
Top Products
4.2 System Programming
Time (Day/Night/Lunch) Service Start Time
4-18 System Programming
007
Description When automatic is programmed in program [006] “Time
(Day/Night/Lunch) Service Changing Mode”, this program sets the
starting time on a day of the week basis.
Selection • Day of the week selection:
Sunday / Monday / Tuesday / Wednesday / Thursday /
Friday / Saturday / (every day of the week)
• Mode: Day / Night / Lunch-S (lunch starting time) /
Lunch-E (lunch ending time)
• Hour: 1 – 12 / None (no change)
• Minute: 0 – 59
• AM / PM
Default Every day of the week — Day – 9:00 AM / Night – 5:00 PM /
Lunch-S – None / Lunch-E – None
Programming 1. Enter 007.
Display: Day/Night Time
2. Press NEXT.
Display: Day of The Week
3. Press NEXT or PREV until the desired day of the week is
displayed.
To assign every day of the week, press instead of NEXT or PREV.
Display example: Sunday
4. Press SELECT.
Display example: Day : 9:00AM
To select another mode, keep pressing SELECT until the desired
selection is displayed.
5. Press .
6. Enter the hour.
To set no change, keep pressing SELECT until “None” is displayed
and go to step 11.
If SELECT is pressed, the display shows the previous entry. If the
previous setting was “None”, press SELECT to enter the starting
time.
To change the current entry, press CLEAR and enter the new time.
7. Press .