Filter
Top Products
4-88 System Programming
4.2 System Programming
DISA Busy Mode
506
Description Selects the mode when destination extension of the call via DISA is
busy. There are three modes as follows.
Call Waiting: a call waiting tone is sent and then the call is held
until the called party responds.
Disconnect: the call is disconnected after the busy tone.
DISA2: OGM2 is sent to the caller and the system waits for
another destination when the first destination is busy.
Selection Call Waiting / Disconnect / DISA2
Default Disconnect
Programming 1. Enter 506.
Display: DISA Busy Mode
2. Press NEXT.
Display example: Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • In program [502] “OGM Mode Selection”, “MODE2” should be
selected if “DISA2” is selected in this program.
Feature References Section 3, Features
Direct Inward System Access (DISA)
Outgoing Message (OGM)