4.2 System Programming
SMDR Account Code Selection
805
System Programming 4-127
Description Selects the account code type printed on the SMDR.
There are the following two types.
CODE: the 4-digit account code number programmed in
[310] “Account Codes”.
INDEX: a 2-digit code number (01 – 24).
Selection CODE / INDEX
Default CODE
Programming 1. Enter 805.
Display: Account Select
2. Press NEXT.
Display example: CODE
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • The printing of the index of the account code only occurs if the
extension user entered their account code in the “Verify – All” or
“Verify – Toll” input mode as programmed in [605] “Account Code
Entry Mode”.
Feature References Section 3, Features
Account Code Entry
Station Message Detail Recording (SMDR)