Filter
Top Products
4.2 System Programming
Call Forwarding to an Outside (CO) Line
607
System Programming 4-107
Description Enables or disables performing the Call Forwarding to an Outside
(CO) Line feature.
Selection • Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
Default All jacks – Disable
Programming 1. Enter 607.
Display: CO Forward
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Call Forwarding – to an Outside (CO) Line