Filter
Top Products
4.2 System Programming
Paired Telephone Assignment for DSS Console
004
System Programming 4-15
Description Assigns the jack numbers for the paired extensions with DSS
Consoles.
Selection • DSS Console number: 1 or 2
• Jack number: 01 – 24 / Disable
Default DSS1 – Disable, DSS2 – Disable
Programming 1. Enter 004.
Display: DSS Pair Assign
2. Press NEXT.
Display: DSS NO? →
3. Enter a DSS Console number (1 or 2).
Pressing NEXT also can enter DSS Console number 1.
Display example: DSS1:Disable
4. Enter a jack number.
To assign no DSS Console jack, press CLEAR.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new jack
number.
5. Press STORE.
6. To program the other DSS Console, press NEXT or PREV.
7. Repeat steps 4 and 5.
8. Press END.
Conditions • Both telephones cannot be assigned to the same jack.
• If a single line telephone is assigned as the paired extension, the paired
DSS Console will not function.
• Jack numbers assigned as the paired extensions in this program cannot
be assigned in program [003] “DSS Console Port Assignment”.
Feature Reference Section 3, Features
DSS Console (KX-T7040)