Filter
Top Products
4.2 System Programming
Automatic Pause Insertion Codes
311
System Programming 4-59
Description Assigns up to 40 automatic pause insertion codes which are
checked with the outside outgoing call number. When one of the
codes is the same as the call number, the pause time assigned in
program [417] “Pause Time” is automatically inserted after the
code. If a second dial tone is sent from the Central Office, it is
convenient to assign the area code as the pause code.
Selection • Code number: 01 – 40
• Pause code number: 7 digits (max.)
Default All codes – Not stored
Programming 1. Enter 311.
Display: Auto Pause Code
2. Press NEXT.
Display: CODE NO? →
3. Enter a code number.
Pressing NEXT also can enter code number 01.
Display example: CODE-01:.......
4. Enter a pause code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another code number, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • Each pause code number has a maximum of seven digits, consisting of
0 – 9, and #.
Feature Reference Section 3, Features
Pause Insertion, Automatic