Filter
Top Products
Features 3-105
3 Features R
Remote Station Lock Control
Description The operator and manager are given the privilege of controling
Electronic Station Lockout and Call Log Lock at any station.
Conditions • Remote Station Lock Control has higher priority over Electronic Station
Lockout and Call Log Lock. If Electronic Station Lockout or Call Log
Lock has already been set by the extension user and Remote Station
Lock is set by the operator or manager, canceling the lock is only
possible by the operator or manager.
• Extension passwords must be assigned to the operator and manager
extensions beforehand.
• The Electronic Station Lockout — CANCEL ALL feature can cancel
this feature.
• When the same extension number Station Lock button is assigned on the
operator and manager DSS Consoles, one can set and the other can
cancel the feature, and vice versa.
• A toll restriction COS number can be assigned for this feature. Certain
types of outgoing outside calls are permitted depending on the assigned
toll restriction COS number.
Programming References
Section 4, System Programming
[108] Flash Mode for a Station Locked Extension
[312] Toll Restriction — Station Lock Boundary Class
DSS Console Features RRRRRRRRRR User Manual
Station Programming — Station Lock Button Assignment (Operator and
Manager only)
Feature References Section 3, Features
Call Log, Incoming
Electronic Station Lockout
Toll Restriction — Station Lock Boundary Class
Operation References Operator/Manager Service Features
— User Manual Electronic Station Lockout — CANCEL ALL
Extension Password Set (Manager only)
Remote Station Lock Control