Filter
Top Products
4-74 System Programming
4.2 System Programming
Pause Time
417
Description Assigns the length of the pause time. The programmed pause time
is automatically inserted after a line access code or host PBX access
code programmed in [403] “Host PBX Access Codes”, or can be
manually inserted by the user with the PAUSE button.
Selection • Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Time (seconds): 1.5 sec / 2.5 sec / 3.5 sec / 4.5 sec
Default All outside (CO) lines — 1.5 sec
Programming 1. Enter 417.
Display: Pause Time
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:1.5sec
4. Keep pressing SELECT until the desired time is displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
Feature References Section 3, Features
Host PBX Access
Pause Insertion, Automatic