Filter
Top Products
4.2 System Programming
Wireless PT Port Assignment
617
System Programming 4-113
Description Used to identify whether the Panasonic Wireless Phone (e.g.
KX-T7880 or KX-T7885) is connected to an extension jack or not.
Selection • Jack number: 01 – 24, ( = all jacks)
• Not Connect / Connect
Default All jacks – Not Connect
Programming 1. Enter 617.
Display: Wireless PT Port
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Not Connect
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all jacks to the same selection, press the key in step 3.
In this case, the display will show: # :Mixed.
• If “Connect” is not assigned for the jack which is connected the
Panasonic Wireless Phone, the wireless phone may work incorrectly.