Filter
Top Products
4.2 System Programming
Carrier Code Assignment
300
System Programming 4-53
Description Assigns carrier codes. This allows the system to recognize a special
user-dialed carrier code in order to apply toll restriction. The
system disregards the assigned code and toll restriction is applied to
the numbers after the code.
Selection • Code number: 01 – 20
• Carrier code number: 10 digits (max.)
Default All codes – Not stored
Programming 1. Enter 300.
Display: Carrier Excepted
2. Press NEXT.
Display: CODE NO? →
3. Enter a code number.
Pressing NEXT also can enter code number 01.
Display example: 01:Not Stored
4. Enter a carrier code number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another code, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • Each carrier code number has a maximum of ten digits, consisting of
0–9, , # and x (PAUSE button). The character “x” can be used as a
wild card character and is entered by pressing the PAUSE button.
Feature References Section 3, Features
Pause Insertion, Automatic
Toll Restriction for Special Carrier Access