Filter
Top Products
4.2 System Programming
DSS Console Port Assignment
4-14 System Programming
003
Description Assigns the jack numbers for the DSS Consoles.
Selection • DSS Console number: 1 or 2
• Jack number: 02 – 24 / Disable
Default All DSS Consoles — Disable
Programming 1. Enter 003.
Display: DSS Jack Assign
2. Press NEXT.
Display: DSS NO? →
3. Enter a DSS Console number (1 or 2).
Pressing NEXT also can enter DSS Console number 1.
Display example: DSS1:Disable
4. Enter a jack number.
To assign no DSS Console jack, press CLEAR.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new jack
number.
5. Press STORE.
6. To program the other DSS Console, press NEXT or PREV.
7. Repeat steps 4 and 5.
8. Press END.
Conditions • Both DSS Consoles cannot be assigned to the same DSS Console jack.
• If a single line telephone is assigned as the paired extension, the paired
DSS Console will not function.
• Jack 01 is the manager extension, so the jack 01 cannot be assigned as
the DSS Console jack.
• Jack numbers assigned as the DSS Console jacks in this program cannot
be assigned in program [004] “Paired Telephone Assignment for DSS
Console”.
Feature Reference Section 3, Features
DSS Console (KX-T7040)