Filter
Top Products
Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide 85
4
Distinctive Ring Patterns
VoIP PIN Tone This tone is played to prompt a VoIP caller to enter a PIN
number.
PSTN PIN Tone This tone is played to prompt a PSTN caller to enter a PIN
number.
Feature Invocation
To n e
Played when a feature is implemented.
Default setting: 350@-4;*(.1/.1/1)
Call Remind Tone When there are 2 calls on the FXS port, and if one call is
held by the UUT (Unit under test) and the other is
connected, a holding tone is played on the UUT to remind
the presence of the held call.
Default setting: blank (the feature is not enabled)
Field Description
Ring1 Cadence Cadence script for distinctive ring 1.
Default setting: 60(2/4)
Ring2 Cadence Cadence script for distinctive ring 2.
Default setting: 60(.8/.4,.8/4)
Ring3 Cadence Cadence script for distinctive ring 3.
Default setting: 60(.4/.2,.4/.2,.8/4)
Ring4 Cadence Cadence script for distinctive ring 4.
Default setting: 60(.3/.2,1/.2,.3/4)
Ring5 Cadence Cadence script for distinctive ring 5.
Default setting: 1(.5/.5)
Ring6 Cadence Cadence script for distinctive ring 6.
Default setting: 60(.2/.4,.2/.4,.2/4)
Ring7 Cadence Cadence script for distinctive ring 7.
Default setting: 60(.4/.2,.4/.2,.4/4)
Ring8 Cadence Cadence script for distinctive ring 8.
Default setting: 60(0.25/9.75)
Field Description