Filter
Top Products
Configuring the Network
Application
Cisco SPA232D Administration Guide 46
3
Manually Adding Port Forwarding
Use this page to enter the port forwarding settings for an application.
To open this page: On the Network Setup > Application > Port Forwarding page,
click the Add Entry button or the pencil icon.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Field Description
Port Forwarding
Type
Choose the type of port forwarding:
• Single Port Forwarding: Forwards traffic for a
specified port to the same or an alternative port
on the target server in the LAN.
• Port Range Forwarding: Forwards traffic to a
range of ports to the same ports on the target
server in the LAN. see the Internet application’s
documentation for the required ports or ranges.
Application Name For single port forwarding, choose a common
application from the drop-down list (such as Telnet, or
DNS).
To add an application that is not on the list, choose Add
a new name, and then enter the name in the Enter a
Name field.
Enter a Name If you chose Port Range Forwarding, or if you chose Add
a new name in the Application Name list for Single Port
Forwarding, enter a name to identify the application.