Filter
Top Products
Administration Settings
Management
Cisco SPA232D Administration Guide 182
5
TR-069
Use the Administration > Management > TR-069 page to configure
communication with an Auto-Configuration Server (ACS) via TR-069 CPE WAN
Management Protocol (CWMP). TR-069 (Technical Report 069) provides a
common platform to manage all voice devices and other customer-premises
equipment (CPE) in large-scale deployments. It provides the communication
between the CPE and the ACS.
To open this page: Click Administration in the menu bar, and then click
Management > TR-069 in the navigation tree.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to redisplay the page with the saved settings.
Allowed Remote IP
Address
You can use this feature to limit access to the
configuration utility based on the IP address of a device.
Choose Any IP Address to allow access from any
external IP address. To specify an external IP address or
range of IP addresses, select the second radio button
and then enter the desired IP address or range. The
default setting is Any IP Address.
Remote
Management Port
Enter the port number to use for access to the
configuration utility from a device on the WAN side of
the ATA. The default port number is 80.
Include the specified port when you enter the address
in your web browser. For example, with the HTTPS
protocol, a WAN IP address of 203.0.113.50, and the
default Remote Management Port of 80, you would
enter: https://203.0.113.50:80
Field Description
Status Click Enabled to enable remote provisioning, or click
Disabled to disable this feature. The default setting is
Disabled.
Field Description