Filter
Top Products
Configuring the Voice Settings
Regional
Cisco SPA232D Administration Guide 99
4
Caller ID Method The choices are described below.
Default setting: Bellcore(N.Amer, China)
• Bellcore (N.Amer,China): CID, CIDCW, and VMWI.
FSK sent after first ring (same as ETSI FSK sent
after first ring) (no polarity reversal or DTAS)
• DTMF (Finland, Sweden): CID only. DTMF sent
after polarity reversal (and no DTAS) and before
first ring.
• DTMF (Denmark): CID only. DTMF sent before first
ring with no polarity reversal and no DTAS.
• ETSI DTMF: CID only. DTMF sent after DTAS (and
no polarity reversal) and before first ring.
• ETSI DTMF With PR: CID only. DTMF sent after
polarity reversal and DTAS and before first ring.
• ETSI DTMF After Ring: CID only. DTMF sent after
first ring (no polarity reversal or DTAS)
• ETSI FSK: CID, CIDCW, and VMWI. FSK sent after
DTAS (but no polarity reversal) and before first ring.
Waits for ACK from a device after DTAS for CIDCW.
• ETSI FSK With PR (UK): CID, CIDCW, and VMWI.
FSK is sent after polarity reversal and DTAS and
before first ring. Waits for ACK from a device after
DTAS for CIDCW. Polarity reversal is applied only if
equipment is on hook.
• DTMF (Denmark) with PR: CID only. DTMF sent
after
polarity reversal (and no DTAS) and before first
ring.
Default setting:
Bellcore(N.Amer, China)
FXS Port Power
Limit
The choices are from 1 to 8.
Default setting: 3
Caller ID FSK
Standard
The ATA supports bell 202 and v.23 standards for caller ID
generation.
Default setting: bell 202
Field Description