Filter
Top Products
Administration Settings
Configuration Management
Cisco SPA232D Administration Guide 195
5
!
CAUTION Upgrading the firmware may take several minutes. Until the process is complete,
DO NOT turn off the power, press the hardware reset button, or click the Back
button in your current browser.
Configuration Management
Use the Administration > Config Management pages to backup and restore the
configuration settings for the ATA.
• Backup Configuration
• Restore Configuration
Backup Configuration
Use the Administration > Config Management > Backup Configuration page to
back up the ATA configuration settings to a file. You can then later restore these
same settings to the ATA.
To open this page: Click Administration in the menu bar, and then click
Config Management > Backup Configuration in the navigation tree.
Click the Backup button to save the configuration information of the ATA. When the
dialog box appears, choose a location where you want to save the .cfg file. Tip:
Rename the file with a name that includes the date and time when you did the
backup.
Restore Configuration
User the Administration > Config Management > Restore Configuration page to
restore the ATA configuration settings from a previous backup. It is recommended
that you back up your current configuration settings before you restore a
configuration.
To open this page: Click Administration in the menu bar, and then click
Config Management > Restore Configuration in the navigation tree.