Filter
Top Products
Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 108
4
Use OB Proxy In
Dialog
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the parameter Use
Outbound Proxy is no, or the Outbound Proxy parameter is
empty.
Default setting: yes
Register Enable periodic registration with the Proxy parameter. This
parameter is ignored if Proxy is not specified.
Default setting: yes
Make Call Without
Reg
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: no
Register Expires Expires value in sec in a REGISTER request. The ATA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register parameter is no. Range:
0 – (2
31
– 1) sec.
Default setting: 3600
Ans Call Without
Reg
Allow answering inbound calls without successful
(dynamic) registration by the unit.
Default setting: no
Use DNS SRV Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
Default setting: no
DNS SRV Auto
Prefix
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a
DNS SRV lookup on that name.
Default setting: no
Field Description