Filter
Top Products
Configuring the Voice Settings
DECT Line 1 - DECT Line 10
Cisco SPA232D Administration Guide 164
4
Subscriber Information
Use DNS SRV If required by your provider, check this box to use DNS
SRV lookup for Proxy and Outbound Proxy.
Default setting: no
DNS SRV Auto
Prefix
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a
DNS SRV lookup on that name.
Default setting: no
Proxy Fallback
Intvl
This parameter sets the delay (sec) after which the ATA
will retry from the highest priority proxy (or outbound
proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and
backup proxy server list is provided to the ATA via DNS
SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion
of priority and so all hosts will be considered at the same
priority and the ATA will not attempt to fall back after a fail
over).
Default setting: 3600
Proxy Redundancy
Method
The ATA makes an internal list of proxies returned in DNS
SRV records. In normal mode this list will contain proxies
ranked by weight and priority.
If the parameter
Based on SRV port
is configured, the ATA
creates a list in normal mode first, and then inspects the
port numbers based on the 1
st
proxy’s port on the list.
Default setting: Normal
Voice Mail Server The URL or IP address of the voice mail server.
Mailbox Subscribe
Expires
The subscription interval for voicemail message waiting
indication. When this time period expires, the ATA sends
another subscribe message to the voice mail server.
Default: 2147483647
Field Description
Display Name Display name for caller ID.
Field Description