Filter
Top Products
Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 122
4
Passthrough Modem Call With <Modem Line Toggle Code>
Passthrough Modem Call With <Modem Line>
NOTE Other fax parameters are not relevant to the call.
Passthrough Modem Call With Manual Configuration
Parameter Value Description
Modem Line No If Modem Line Toggle Code is used
to make the modem call, do not set
it to Yes
Modem Line
Toggle Code
*99 Set it to any preferred code.
NOTE Pre-dial *99 before dialing.
Other fax parameters are not relevant
to the call.
FAX Disable
ECAN
Ye s
Parameter Value Description
Modem Line Yes
FAX Disable
ECAN
Ye s
Parameter Value Description
Preferred Codec G.711u or G.711a Depends on the passthrough
codec used.
FAX V21 Detect
Enable
No
FAX CNG Detect
Enable
No