Filter
Top Products
Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 100
4
Line 1 Settings (PHONE Port)
Use the Voice > Line 1 page to configure the settings for calls through the PHONE
port.
To open this page: Click Voice on the menu bar, and then click Line1 in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
NOTE In a configuration profile, the FXS parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the port to which the setting
applies.
Line Enable
Streaming Audio Server (SAS)
Feature Invocation
Method
Select the method you want to use, Default or Sweden
default.
Default setting: Default
Field Description
Field Description
Line Enable To enable this line for service, select yes. Otherwise,
select no.
Default setting: yes
Field Description
SAS Enable To enable the use of the line as a streaming audio source,
select yes. Otherwise, select no. If enabled, the line cannot
be used for outgoing calls. Instead, it auto-answers
incoming calls and streams audio RTP packets to the
caller.
Default setting: no