Filter
Top Products
Administration Settings
Management
Cisco SPA232D Administration Guide 180
5
Web Access Management
Use the Administration > Management > Web Access Management page to
configure the settings for access to the administration of the ATA.
To open this page: Click Administration in the menu bar, and then click
Management > Web Access Management in the navigation tree. After making
changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
Web Access
Field Description
Admin Access This feature controls access to the configuration utility
from devices that are connected via the ETHERNET
(LAN) port.
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Enabled. If you
administer and configure the ATA from a computer that
is connected to the LAN, this feature must be enabled.
Web Utility Access Select the protocol to use for access to the
configuration utility from a device on the WAN. Choose
HTTP and/or HTTPS. For secure Internet access, select
HTTPS. The default value is HTTP.