Filter
Top Products
Getting Started
Before You Begin
Cisco SPA232D Administration Guide 12
1
Before You Begin
Before you begin the installation, make sure that you have the following equipment
and services:
• An active Internet account and Voice over IP account
• Ethernet cable to connect to your broadband network device
• Phone to connect to your ATA
• Phone cable to connect your phone
• Optional: Uninterruptible Power Supply (UPS) to provide backup power
• Optional: Cisco SPA302D Mobility Enhanced Cordless Handsets
Product Features
Top Panel
Feature Description
Page/
Registration
Steady green—One or more handsets is
registered.
Fast flashing green—The base is in registration
mode. To activate registration mode, press the
button for at least 7 seconds.
Slow flashing green—The base is in paging mode
or a handset is off hook. To activate paging mode to
locate a handset, press the button for a few
seconds; handsets ring.
Off—No handset is registered to the base.
LINE
Steady green—The line is off hook and connected
to the local telephone system.
Slow flashing green—The line is off hook.
Off—The port is not ready.
PHONE
Steady green—The device is on hook and
registered to a SIP proxy.
Slow flashing green—The device is off hook.
Off—The port is not ready.
INTERNET
Flashing green—Transmitting or receiving data
through the WAN port.
Off—No link.