Filter
Top Products
B
Cisco SPA232D Administration Guide 207
Using the IVR for Administration
An IVR system is available to help you to configure and manage your ATA. Use a
telephone keypad to select options and to make your entries.
To access the IVR menu:
STEP 1 Connect an analog phone to a PHONE port of the ATA.
STEP 2 Press the star key four times: ****
STEP 3 When challenged for a password, log in as an administrator by using the default
administrator's password of 1234# or log in as the PHONE port's user by
pressing #.
STEP 4 Enter the code for the desired action. See the IVR Actions table for details.
TIPS:
• Enter the numbers slowly, listening for the audio confirmation before
entering the next number.
• After you select an option, press the # (pound) key.
• To exit the menu, hang up the telephone or enter 3948# to exit.
• After entering a value, such as an IP address, press the # (pound) key to
indicate that you have finished your selection. Then proceed as needed:
- To save a setting, press 1.
- To review a setting, press 2.
- To re-enter a setting, press 3.
- To cancel your entry and return to the main menu, press * (star).
• While entering a value, you can cancel the changes by pressing the * (star)
key twice within half a second. Be sure to press the key quickly, or the * will
be treated as a decimal point entry.