Filter
Top Products
Configuring the Voice Settings
PSTN User
Cisco SPA232D Administration Guide 153
4
PSTN-To-VoIP Selective Call Forward Settings
PSTN-To-VoIP Speed Dial Settings
PSTN Ring Thru Line 1 Distinctive Ring Settings
Field Description
Cfwd Sel1-8 Caller Eight PSTN Caller Number Patterns to be blocked for VoIP
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the ATA will not auto-answers the call.
Cfwd Sel1-8 Dest Eight VoIP destinations to forward a PSTN caller matching
the
Cfwd Sel x Caller parameter.
If this entry is blank, the
PSTN caller is blocked for VoIP service.
Cfwd Last Caller The Caller number that is actively forwarded to Cfwd Last
Dest by using the Call Forward Last activation code.
Default setting: blank
Cfwd Last Dest Forward number for the Cfwd Last Caller parameter.
Default setting: blank
Block Last Caller ID of caller blocked via the Block Last Caller service.
Default setting: blank
Accept Last Caller ID of caller accepted via the Accept Last Caller service.
Default setting: blank
Field Description
Speed Dial 2-9 The VoIP number to call when the PSTN caller dials the
specified digit.
Default setting: blank
Field Description
Ring1-8 Caller Eight PSTN Caller Number Patterns such that the
corresponding ring will be used to ring through Line 1 if
the PSTN caller matches this pattern. The ring patterns are
configured on the Voice > Regional page. For more
information, see Distinctive Ring Patterns, page 85.
Default setting: blank