Filter
Top Products
Configuring the Voice Settings
Provisioning
Cisco SPA232D Administration Guide 79
4
Downgrade Rev
Limit
Enforces a lower limit on the acceptable version number
during a firmware upgrade or downgrade. The ATA does
not complete a firmware upgrade operation unless the
firmware version is greater than or equal to this parameter.
Default setting: blank
NOTE The devices with the following PID and TAN numbers (or
later numbers) cannot be downgraded to a version older than
1.3.3:
• PID—SPA232D-G1 TAN—74-9321-01 F0
• PID—SPA232D-G7 TAN—74-9324-01 F0
• PID—SPA232D-R1 TAN—74-9323-01 F0
• PID—SPA232D-R7 TAN—74-9325-01 F0
Upgrade Rule This parameter is a firmware upgrade script with the
same syntax as Profile_Rule. Defines upgrade conditions
and associated firmware URLs.
Default setting: blank
Log Upgrade
Request Msg
Syslog message issued at the start of a firmware upgrade
attempt.
Default setting: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Log Upgrade
Success Msg
Syslog message issued after a firmware upgrade attempt
completes successfully.
Default setting: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade
Failure Msg
Syslog message issued after a failed firmware upgrade
attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
License Keys This field is not currently used.
Field Description