Filter
Top Products
Administration Settings
Management
Cisco SPA232D Administration Guide 186
5
User List (Password Management)
Use the Administration > Management > User List page to manage the two user
accounts for the configuration utility. The administrator-level account has the
default username admin and password admin. The user-level account has access
to modify a limited set of features. This account has the default username cisco
and password cisco.
For the IVR, no user password is required; the user simply presses # when
prompted. The default administrator password is 1234#. You can configure these
passwords on the System page.
To open this page: Click Administration in the menu bar, and then click
Management > User List in the navigation tree.
To update a password:
STEP 1 In the User List table, click the pencil icon for the account that you want to update.
STEP 2 On the User Account page, enter the username and password, as described
below.
• Username: Enter a username.
• Old Password (administrator account only): Enter the existing password.
The default administrator password is admin. The default guest password is
cisco.
• New Password: Enter up to 32 characters for your new password.
• Confirm New Password: Enter the new password again, to confirm.
STEP 3 After making changes, click Submit to save your settings, or click Cancel to
redisplay the page with the saved settings.