Support User Manuals

Cisco Systems SPA232D Telephone Accessories User Manual

Open as PDF

of 236

Configuring the Voice Settings

Line1 Settings (PHONE Port)

Cisco SPA232D Administration Guide 121

4

G3 Passthrough FAX Call With <FAX Line Toggle Code

SG3/V.34 Passthrough FAX Call With <FAX Line Toggle Code

Parameter Value Description

FAX Disable

ECAN

No

Echo Canc Enable Yes

Modem Line No

FAX Line Toggle

Code

#99 Set it to any preferred code.

NOTE Pre-dial #99 before dialing.

Fax call made in this method does not

detect fax tone or send out any fax

request messages (like NSE or Re-

INVITE message) to the remote

gateway, which causes interoperability

issue with remote side.

Other fax parameters are not

relevant to the call.

Parameter Value Description

FAX Disable

ECAN

Ye s

Echo Canc Enable Yes

Modem Line No

FAX Line Toggle

Code

#99 Set it to any preferred code.

NOTE Pre-dial #99 before dialing.

Fax call made in this method does not

detect fax tone or send out any fax

request messages (like NSE or Re-

INVITE message) to the remote

gateway, which causes interoperability

issue with remote side.

Other fax parameters are not

relevant to the call.

previous next