Filter
Top Products
Configuring the Voice Settings
Information
Cisco SPA232D Administration Guide 58
4
DECT 1 ~ DECT 10 Status
Field Description
Registration State Indicates whether or not the line has registered with the
SIP proxy: Registered, Not Registered, or Failed.
Last Registration
At
The last date and time when the line was registered.
Next Registration
In
The number of seconds before the next registration
renewal.
Message Waiting Indicates whether or not there are new messages: yes or
no. The value automatically is set to yes when a message
is received. You also can clear or set the flag manually
from the User 1 page.
Call Back Active Indicates whether a call back request is in progress: yes
or no.
Last Called
Number
The phone number that was most recently called through
this port.
Last Caller
Number
The originating phone number of the call that was most
recently received through this port.
Mapped SIP Port Port number of the SIP port mapped by NAT.
Call 1 and 2 State The current call state:
• Idle
• Collecting PSTN Pin
• Invalid PSTN PIN
• PSTN Caller Accepted
• Connected to PSTN
Call 1 and 2 Tone The type of tone used by the call.
Call 1 and 2
Encoder
The codec used for encoding.
Call 1 and 2
Decoder
The codec used for decoding.