Filter
Top Products
Getting Started
Configuration and Management of the ATA
Cisco SPA232D Administration Guide 16
1
Configuration and Management of the ATA
You can use the web-based configuration utility to set up your ATA. You also can
use the built-in Interactive Voice Response (IVR) system. (See Using the IVR for
Administration, page18.)
STEP 1 Connect the provided Ethernet network cable to the ETHERNET (Yellow) port of
the ATA. Connect the other end of the cable to the Ethernet port of your PC.
STEP 2 Power on your computer.
NOTE: Make sure your computer’s Ethernet adapter is set to obtain an IP address
automatically (DHCP). For more information, refer to the Help for your operating
system.
STEP 3 Start a web browser on your computer.
STEP 4 In the Address bar, enter: 192.168.15.1
Note: 192.168.15.1 is the default local IP address of the ATA.
STEP 5 To log in for the first time, enter the default username, admin, and the default
password, admin. The password is case sensitive.
NOTE: A user account allows access to limited settings and status pages. To log in
as a user, enter cisco as the username and the password.
STEP 6 Use the Quick Setup page as needed to register your VoIP accounts in the fields
for Line 1 and DECT Line1.
Your VoIP service may require only a few basic parameters to successfully
register the Cisco SPA232D. The Quick Setup page offers a shortcut to enter the
basic parameters. For a more comprehensive listing of parameters, choose the
Voice menu, and then use the links in the navigation tree.
• Enter Proxy: Enter the domain name or URL of the service provider’s proxy
server.
• Display Name: Enter the name of the business. This name typically is used
for the Caller ID.
• User ID: Enter the user ID for your Internet account with this service provider.
• Password: Enter the password for your Internet account.
• Dial Plan (Line 1 only): Keep the default settings (recommended). Detailed
information about the dial plan settings is available in the online Help and the
administration guide.