Filter
Top Products
Configuring the Voice Settings
DECT Line 1 - DECT Line 10
Cisco SPA232D Administration Guide 161
4
Call Feature Settings
Auth INVITE When enabled, authorization is required for initial incoming
INVITE requests from the SIP proxy.
Default setting: no
Reply 182 On Call
Waiting
When enabled, the ATA replies with a SIP182 response to
the caller if it is already in a call and the line is off-hook. To
use this feature select yes.
Default setting: no
Field Description
Blind Attn-Xfer
Enable
Enables the ATA to perform an attended transfer operation
by ending the current call leg and performing a blind
transfer of the other call leg. If this feature is disabled, the
ATA performs an attended transfer operation by referring
the other call leg to the current call leg while maintaining
both call legs. To use this feature, select yes. Otherwise,
select no.
Default setting: no
MOH Server User ID or URL of the auto-answering streaming audio
server. When only a user ID is specified, the current or
outbound proxy is contacted. Music-on-hold is disabled if
the MOH Server is not specified.
Default setting: blank
Xfer When Hangup
Conf
Makes the ATA perform a transfer when a conference call
has ended. Select yes or no from the drop-down menu.
Default setting: yes
Field Description