Filter
Top Products
Configuring the Voice Settings
PSTN (LINE Port)
Cisco SPA232D Administration Guide 132
4
Proxy and Registration
Field Description
Proxy SIP proxy server for all outbound requests.
Default setting: blank
Outbound Proxy SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Default setting: blank
Use Outbound
Proxy
Enable the use of
Outbound Proxy
. If set to no, the
Outbound Proxy
parameter and
Use OB Proxy in Dialog
is
ignored.
Default setting: no
Use OB Proxy In
Dialog
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the
Use Outbound Proxy
parameter is no, or if the
Outbound Proxy
parameter is
empty.
Default setting: yes
Register Enable periodic registration with the
Proxy
. This
parameter is ignored if the
Proxy
parameter is not
specified.
Default setting: yes
Make Call Without
Reg
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: yes
Register Expires Allow answering inbound calls without successful
(dynamic) registration by the unit. If proxy responded to
REGISTER with a smaller Expires value, the ATA will renew
registration based on this smaller value instead of the
configured value. If registration failed with an Expires too
brief error response, the ATA will retry with the value given
in the Min-Expires header in the error response.
Default setting: 3600