Filter
Top Products
Configuring the Voice Settings
Provisioning
Cisco SPA232D Administration Guide 74
4
Linksys Key System Parameters
Provisioning
Use the Voice > Provisioning page to configure profiles and parameters to
provision the ATA from a remote server.
NOTE Cisco SPA122, SPA112, and SPA232D supports 302/310 redirect while
provisioning.
To open this page: Click Voice on the menu bar, and then click Provisioning in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Field Description
Linksys Key
System
To enable operation with the Cisco SPA9000, choose yes.
Otherwise, choose no.
Default setting: no
Multicast Address The multicast address for devices in the Cisco SPA9000
voice network.
Default setting: 224.168.168.168:6061
Key System Auto
Discovery
To enable auto-discovery of the Cisco SPA9000 voice
system, choose yes. Otherwise, choose no.
Default setting: yes
Key System IP
Address
The IP address of the Cisco SPA9000.
Default setting: blank
Force LAN Codec If needed, specify a voice codec.
Default setting: none