Filter
Top Products
Getting Started
Connecting the Equipment
Cisco SPA232D Administration Guide 15
1
Connecting the Equipment
NOTE For wall-mounting instructions, see Additional Information, page 18.
STEP 1 Connect the provided Ethernet cable to the INTERNET (Blue) port. Connect the
other end of the cable directly to your broadband network device.
STEP 2 Connect the provided phone cable to the PHONE1 (Gray) port. Connect the other
end of the cable to your analog phone or fax machine.
STEP 3 Optionally, connect an Ethernet network cable to the ETHERNET (Yellow) port of
the ATA. Connect the other end of the cable to a device on your network, such as a
computer.
STEP 4 Connect an analog phone line to the LINE (Green) port to connect the ATA to your
local telephone system.
STEP 5 Connect the provided power adapter to the POWER port. The unit powers on.
239756
WAN