Filter
Top Products
2
Cisco SPA232D Administration Guide 26
Quick Setup for Voice over IP Service
The Quick Setup page is displayed automatically when you first log on ATA. You
can use this page to quickly configure connectivity to your provider’s Voice over IP
network for your analog phone and Cisco SPA302D handsets.
NOTE Connecting to your service provider’s network requires Internet connectivity. With
the default network settings, your ATA should have Internet connectivity when you
connect a cable from the WAN port of the ATA to a port on your router or broadband
network device. For more information, see Internet Settings, page 31.
To open this page: Click Quick Setup in the menu bar.
STEP 1 Specify the settings for the phone service to be used by each type of device or
line. Follow the requirements and recommendations of your service provider. The
options are described below.
Device/line types:
• Line 1: The phone service used by an analog (FXS) phone or fax machine
that is connected to the PHONE port.
• PSTN: The phone service used by a phone line that is connected from the
LINE port to the PSTN.
• DECT Line 1: The phone service used by all connected Cisco SPA302D
cordless handsets (when using the default settings in DECT Handset
Outgoing Line Selection and DECT Line Contact List sections). You can add
additional phone services for these handsets on the Voice > DECT Line 2 to
DECT Line 10 pages.
Settings:
• Proxy: Enter the domain name or URL of the service provider’s proxy server.
• Display Name: Enter the name that you want to use to identify your account.
This name typically is used as your Caller ID name.
• User ID: Enter the user ID that is required to log in to your Internet account.